admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
11 lines
518 B
Markdown
11 lines
518 B
Markdown
# Board - [KAKUTEH7WING](https://holybro.com/products/kakute-h743-wing)
|
|
|
|
[manufacturer manual](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Holybro_KakuteH743-Wing_Manual_v1.0_C.pdf?v=1693393206)
|
|
|
|
Note that this board has two i2c plugs.
|
|
The six-pin plug should be used for GPS and compass.
|
|
The 4-pin plug should be used for other i2c sesors such as i2c pitot (airspeed sensor), rangefinder, and external
|
|
temperature sensors.
|
|
|
|
|