admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
29 lines
710 B
Markdown
29 lines
710 B
Markdown
# Board - [MATEKSYS F405-Wing](https://inavflight.com/shop/p/MATEKF405WING)
|
|
|
|
## Specification:
|
|
|
|
* STM32F405 CPU
|
|
* OSD
|
|
* BMP280 barometer
|
|
* SD slot
|
|
* 6 UART serial ports
|
|
* I2C
|
|
* PDB for 2 motors
|
|
* 7 servos
|
|
* 5A BEC for the servos
|
|
|
|
## Details
|
|
|
|
* For Matek F405-WING use `MATEKF405SE` firmware.
|
|
* SBUS pin is connected to UART2
|
|
* SmartPort telemetry can be setup with `SoftwareSerial` feature turned on, SmartPort configured in SoftwareSerial1 and receiver connected to UART2 TX pad
|
|
|
|
### Alternate targets
|
|
|
|
#### MATEKF045SE_PINIO
|
|
`MATEKF045SE_PINIO` replaces UART 6 with a PINIO interface. TX6 for PINIO USER 1 and RX6 for PINIO USER 2
|
|
|
|
## Where to buy:
|
|
|
|
* [Banggood](https://inavflight.com/shop/p/MATEKF405WING)
|