admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
710 B
710 B
Board - MATEKSYS F405-Wing
Specification:
- STM32F405 CPU
- OSD
- BMP280 barometer
- SD slot
- 6 UART serial ports
- I2C
- PDB for 2 motors
- 7 servos
- 5A BEC for the servos
Details
- For Matek F405-WING use
MATEKF405SEfirmware. - SBUS pin is connected to UART2
- SmartPort telemetry can be setup with
SoftwareSerialfeature turned on, SmartPort configured in SoftwareSerial1 and receiver connected to UART2 TX pad
Alternate targets
MATEKF045SE_PINIO
MATEKF045SE_PINIO replaces UART 6 with a PINIO interface. TX6 for PINIO USER 1 and RX6 for PINIO USER 2