admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
23 lines
753 B
Markdown
23 lines
753 B
Markdown
# Board - KroozX
|
|
|
|
|
|
|
|
## Features
|
|
|
|
* MCU: STM32F4RGT6
|
|
* IMU: MPU6000 (SPI bus), ICM20608 (I2C bus)
|
|
* BARO: MS5611
|
|
* VCP: Yes
|
|
* Hardware UARTS: 5 (RX6/RX1/TX1 with onboard inverters)
|
|
* PWM outputs: 10
|
|
* OSD: MAX7456 with a switch for 2 video channel
|
|
* Blackbox: MicroSD card slot (SD/SDHC, upto 64GB)
|
|
* PPM/SBUS: RX6 with onboard inverter
|
|
* Wireless: HC-12 onboard transceiver
|
|
* Battery Voltage Sensor: Yes, up to 6S input
|
|
* Current Sensor: Yes
|
|
* Integrated Voltage Regulator: 5V 2000mA, 10V 2000mA with LC filter
|
|
* Buttons: No (powering the board with plugged USB starts STM DFU bootloader)
|
|
* Buzzer driver: Yes
|
|
* RSSI Analog/PWM port: Yes
|
|
* SWD port: Yes (SWIO, SWCLK, RST pins) |