admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
43 lines
2.2 KiB
Markdown
43 lines
2.2 KiB
Markdown
# Board - FLYINGRCF4WINGMINI
|
|
|
|
This is a budget-friendly flight controller. Component tolerances and quality control may vary compared with higher-cost hardware, so users should test critical functions carefully before flying. The board has been advertised as INAV-compatible, but it was not originally submitted through the official INAV target process; current support exists thanks to community work, especially the contribution from dixi83.
|
|
|
|
The manufaturer, FlyingRC, now has a GitHub available: https://github.com/FlyingRC-Official
|
|
|
|
Hardware issues have been reported on these flight controllers. They are also missing many features. Unlike most other _wing_ flight controllers, this is not an all-in-one solution. It requires an external power source for servos, so is not as small or light as it first appears.
|
|
|
|
> [!WARNING]
|
|
> We recommend you only use this flight controller on very light aircraft that you will keep within line-of-sight distances. Reliability of the hardware is far from guaranteed. So fitting to a larger, heavier aircraft adds unnecessary safety risks. Also, there are essential features missing for other types of flights. Please keep this for small park fliers only.
|
|
>
|
|
> Also, if you choose to buy one of these, compare pricing carefully. At around US$40 there are more capable flight controllers available.
|
|
|
|
## Specifications
|
|
| | |
|
|
|-----|-----|
|
|
| MCU | STM32F405RTG6 |
|
|
| Gyro | ICM-42605 / BMI270 |
|
|
| Baro | SPL06 |
|
|
| UARTS | 1, 2 (RX only - SBUS), 4 (DJI), 5 |
|
|
| PWM | Six + One (S12 used for LED control) |
|
|
| I<sup>2</sup>C | 1 |
|
|
| Size | 27.9 x 20.3 x 11.2 mm |
|
|
| Weight | 2.8g |
|
|
|
|
> [!NOTE]
|
|
> There is conflicting information for the power this FC can handle. There are 2 specs provided:
|
|
> | | |
|
|
> |---|---|
|
|
> | Voltmeter | 2.5-30V |
|
|
> | Power input | 5v |
|
|
>
|
|
> There is no ADC for "voltmeter" input. So potentially this FC can run at 1S to 6S. However there are only 2 LDO regulators on the FC itself.
|
|
|
|
## Notable missing features
|
|
* Current sensor on earlier hardware revisions (V4 adds a backside ADC current-sensor pad)
|
|
* Blackbox recording
|
|
* Analogue OSD
|
|
* PINIO (for VTX power switching etc)
|
|
* Additional ADCs (airspeed sensor, RSSI, etc)
|
|
* On-board power rail for servos
|
|
* Filtered power for video
|