admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
17 lines
706 B
Markdown
17 lines
706 B
Markdown
# Board - FOXEERF405
|
|
|
|
The FOXEERF405 described here:
|
|
|
|
This board use the STM32F405RGT6 microcontroller and have the following features:
|
|
* 1024K bytes of flash memory,192K bytes RAM,168 MHz CPU/210 DMIPS
|
|
* The 16M byte SPI flash for data logging
|
|
* USB VCP and boot select button on board(for DFU)
|
|
* Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.And could select 5v/9v with pad
|
|
* Serial LED interface(LED_STRIP)
|
|
* VBAT/CURR/RSSI sensors input
|
|
* Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry
|
|
* Supports SBus, Spektrum1024/2048, PPM. No external inverters required (built-in).
|
|
* Supports I2C device extend(baro/compass/OLED etc)
|
|
* Supports GPS
|
|
* Supports MPU6000 or ICM20689
|