admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
706 B
706 B
Board - FOXEERF405
The FOXEERF405 described here:
This board use the STM32F405RGT6 microcontroller and have the following features:
- 1024K bytes of flash memory,192K bytes RAM,168 MHz CPU/210 DMIPS
- The 16M byte SPI flash for data logging
- USB VCP and boot select button on board(for DFU)
- Stable voltage regulation,9V/2A DCDC BEC for VTX/camera etc.And could select 5v/9v with pad
- Serial LED interface(LED_STRIP)
- VBAT/CURR/RSSI sensors input
- Suppose IRC Tramp/smart audio/FPV Camera Control/FPORT/telemetry
- Supports SBus, Spektrum1024/2048, PPM. No external inverters required (built-in).
- Supports I2C device extend(baro/compass/OLED etc)
- Supports GPS
- Supports MPU6000 or ICM20689