admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
903 B
903 B
This pull requests adds support for $TARGET_NAME
- Target complies with
docs/policies/NEW_HARDWARE_POLICY.md
The following items have been checked and confirmed working by an INAV developer on actual hardware: (feel free to remove non-relevant items)
- Samples received
- Flash firmware
- Calibrate
- Orientation matches
- Gyro working
- Accel working
- Voltage correct
- Current correct
- Baro working
- Mag I2C Bus
- Additional I2C2 Buses (Airspeed/other accessories)
- UART1
- UART2
- UART3
- UART4
- UART5
- UART6
- UART7
- UART8
- Analog Camera working
- Video Out working
- OSD working
- LEDs working
- Buzzer working
- Motor outputs
- DShot support on m1-4
- Servo outputs
- Blackbox
- PINIO1
- PINIO2
- PINIO3
- PINIO4