Files
inav/lib/main/MAVLink/common/mavlink_msg_isbd_link_status.h
admin dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
Sync inav to Gitea
2026-08-03 16:37:40 +08:00

457 lines
25 KiB
C

#pragma once
// MESSAGE ISBD_LINK_STATUS PACKING
#define MAVLINK_MSG_ID_ISBD_LINK_STATUS 335
typedef struct __mavlink_isbd_link_status_t {
uint64_t timestamp; /*< [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.*/
uint64_t last_heartbeat; /*< [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.*/
uint16_t failed_sessions; /*< Number of failed SBD sessions.*/
uint16_t successful_sessions; /*< Number of successful SBD sessions.*/
uint8_t signal_quality; /*< Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.*/
uint8_t ring_pending; /*< 1: Ring call pending, 0: No call pending.*/
uint8_t tx_session_pending; /*< 1: Transmission session pending, 0: No transmission session pending.*/
uint8_t rx_session_pending; /*< 1: Receiving session pending, 0: No receiving session pending.*/
} mavlink_isbd_link_status_t;
#define MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN 24
#define MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN 24
#define MAVLINK_MSG_ID_335_LEN 24
#define MAVLINK_MSG_ID_335_MIN_LEN 24
#define MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC 225
#define MAVLINK_MSG_ID_335_CRC 225
#if MAVLINK_COMMAND_24BIT
#define MAVLINK_MESSAGE_INFO_ISBD_LINK_STATUS { \
335, \
"ISBD_LINK_STATUS", \
8, \
{ { "timestamp", NULL, MAVLINK_TYPE_UINT64_T, 0, 0, offsetof(mavlink_isbd_link_status_t, timestamp) }, \
{ "last_heartbeat", NULL, MAVLINK_TYPE_UINT64_T, 0, 8, offsetof(mavlink_isbd_link_status_t, last_heartbeat) }, \
{ "failed_sessions", NULL, MAVLINK_TYPE_UINT16_T, 0, 16, offsetof(mavlink_isbd_link_status_t, failed_sessions) }, \
{ "successful_sessions", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_isbd_link_status_t, successful_sessions) }, \
{ "signal_quality", NULL, MAVLINK_TYPE_UINT8_T, 0, 20, offsetof(mavlink_isbd_link_status_t, signal_quality) }, \
{ "ring_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 21, offsetof(mavlink_isbd_link_status_t, ring_pending) }, \
{ "tx_session_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 22, offsetof(mavlink_isbd_link_status_t, tx_session_pending) }, \
{ "rx_session_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 23, offsetof(mavlink_isbd_link_status_t, rx_session_pending) }, \
} \
}
#else
#define MAVLINK_MESSAGE_INFO_ISBD_LINK_STATUS { \
"ISBD_LINK_STATUS", \
8, \
{ { "timestamp", NULL, MAVLINK_TYPE_UINT64_T, 0, 0, offsetof(mavlink_isbd_link_status_t, timestamp) }, \
{ "last_heartbeat", NULL, MAVLINK_TYPE_UINT64_T, 0, 8, offsetof(mavlink_isbd_link_status_t, last_heartbeat) }, \
{ "failed_sessions", NULL, MAVLINK_TYPE_UINT16_T, 0, 16, offsetof(mavlink_isbd_link_status_t, failed_sessions) }, \
{ "successful_sessions", NULL, MAVLINK_TYPE_UINT16_T, 0, 18, offsetof(mavlink_isbd_link_status_t, successful_sessions) }, \
{ "signal_quality", NULL, MAVLINK_TYPE_UINT8_T, 0, 20, offsetof(mavlink_isbd_link_status_t, signal_quality) }, \
{ "ring_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 21, offsetof(mavlink_isbd_link_status_t, ring_pending) }, \
{ "tx_session_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 22, offsetof(mavlink_isbd_link_status_t, tx_session_pending) }, \
{ "rx_session_pending", NULL, MAVLINK_TYPE_UINT8_T, 0, 23, offsetof(mavlink_isbd_link_status_t, rx_session_pending) }, \
} \
}
#endif
/**
* @brief Pack a isbd_link_status message
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
*
* @param timestamp [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param last_heartbeat [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param failed_sessions Number of failed SBD sessions.
* @param successful_sessions Number of successful SBD sessions.
* @param signal_quality Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.
* @param ring_pending 1: Ring call pending, 0: No call pending.
* @param tx_session_pending 1: Transmission session pending, 0: No transmission session pending.
* @param rx_session_pending 1: Receiving session pending, 0: No receiving session pending.
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_isbd_link_status_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
uint64_t timestamp, uint64_t last_heartbeat, uint16_t failed_sessions, uint16_t successful_sessions, uint8_t signal_quality, uint8_t ring_pending, uint8_t tx_session_pending, uint8_t rx_session_pending)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN];
_mav_put_uint64_t(buf, 0, timestamp);
_mav_put_uint64_t(buf, 8, last_heartbeat);
_mav_put_uint16_t(buf, 16, failed_sessions);
_mav_put_uint16_t(buf, 18, successful_sessions);
_mav_put_uint8_t(buf, 20, signal_quality);
_mav_put_uint8_t(buf, 21, ring_pending);
_mav_put_uint8_t(buf, 22, tx_session_pending);
_mav_put_uint8_t(buf, 23, rx_session_pending);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#else
mavlink_isbd_link_status_t packet;
packet.timestamp = timestamp;
packet.last_heartbeat = last_heartbeat;
packet.failed_sessions = failed_sessions;
packet.successful_sessions = successful_sessions;
packet.signal_quality = signal_quality;
packet.ring_pending = ring_pending;
packet.tx_session_pending = tx_session_pending;
packet.rx_session_pending = rx_session_pending;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#endif
msg->msgid = MAVLINK_MSG_ID_ISBD_LINK_STATUS;
return mavlink_finalize_message(msg, system_id, component_id, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
}
/**
* @brief Pack a isbd_link_status message
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param status MAVLink status structure
* @param msg The MAVLink message to compress the data into
*
* @param timestamp [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param last_heartbeat [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param failed_sessions Number of failed SBD sessions.
* @param successful_sessions Number of successful SBD sessions.
* @param signal_quality Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.
* @param ring_pending 1: Ring call pending, 0: No call pending.
* @param tx_session_pending 1: Transmission session pending, 0: No transmission session pending.
* @param rx_session_pending 1: Receiving session pending, 0: No receiving session pending.
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_isbd_link_status_pack_status(uint8_t system_id, uint8_t component_id, mavlink_status_t *_status, mavlink_message_t* msg,
uint64_t timestamp, uint64_t last_heartbeat, uint16_t failed_sessions, uint16_t successful_sessions, uint8_t signal_quality, uint8_t ring_pending, uint8_t tx_session_pending, uint8_t rx_session_pending)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN];
_mav_put_uint64_t(buf, 0, timestamp);
_mav_put_uint64_t(buf, 8, last_heartbeat);
_mav_put_uint16_t(buf, 16, failed_sessions);
_mav_put_uint16_t(buf, 18, successful_sessions);
_mav_put_uint8_t(buf, 20, signal_quality);
_mav_put_uint8_t(buf, 21, ring_pending);
_mav_put_uint8_t(buf, 22, tx_session_pending);
_mav_put_uint8_t(buf, 23, rx_session_pending);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#else
mavlink_isbd_link_status_t packet;
packet.timestamp = timestamp;
packet.last_heartbeat = last_heartbeat;
packet.failed_sessions = failed_sessions;
packet.successful_sessions = successful_sessions;
packet.signal_quality = signal_quality;
packet.ring_pending = ring_pending;
packet.tx_session_pending = tx_session_pending;
packet.rx_session_pending = rx_session_pending;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#endif
msg->msgid = MAVLINK_MSG_ID_ISBD_LINK_STATUS;
#if MAVLINK_CRC_EXTRA
return mavlink_finalize_message_buffer(msg, system_id, component_id, _status, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#else
return mavlink_finalize_message_buffer(msg, system_id, component_id, _status, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#endif
}
/**
* @brief Pack a isbd_link_status message on a channel
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param chan The MAVLink channel this message will be sent over
* @param msg The MAVLink message to compress the data into
* @param timestamp [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param last_heartbeat [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param failed_sessions Number of failed SBD sessions.
* @param successful_sessions Number of successful SBD sessions.
* @param signal_quality Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.
* @param ring_pending 1: Ring call pending, 0: No call pending.
* @param tx_session_pending 1: Transmission session pending, 0: No transmission session pending.
* @param rx_session_pending 1: Receiving session pending, 0: No receiving session pending.
* @return length of the message in bytes (excluding serial stream start sign)
*/
static inline uint16_t mavlink_msg_isbd_link_status_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
mavlink_message_t* msg,
uint64_t timestamp,uint64_t last_heartbeat,uint16_t failed_sessions,uint16_t successful_sessions,uint8_t signal_quality,uint8_t ring_pending,uint8_t tx_session_pending,uint8_t rx_session_pending)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN];
_mav_put_uint64_t(buf, 0, timestamp);
_mav_put_uint64_t(buf, 8, last_heartbeat);
_mav_put_uint16_t(buf, 16, failed_sessions);
_mav_put_uint16_t(buf, 18, successful_sessions);
_mav_put_uint8_t(buf, 20, signal_quality);
_mav_put_uint8_t(buf, 21, ring_pending);
_mav_put_uint8_t(buf, 22, tx_session_pending);
_mav_put_uint8_t(buf, 23, rx_session_pending);
memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#else
mavlink_isbd_link_status_t packet;
packet.timestamp = timestamp;
packet.last_heartbeat = last_heartbeat;
packet.failed_sessions = failed_sessions;
packet.successful_sessions = successful_sessions;
packet.signal_quality = signal_quality;
packet.ring_pending = ring_pending;
packet.tx_session_pending = tx_session_pending;
packet.rx_session_pending = rx_session_pending;
memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
#endif
msg->msgid = MAVLINK_MSG_ID_ISBD_LINK_STATUS;
return mavlink_finalize_message_chan(msg, system_id, component_id, chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
}
/**
* @brief Encode a isbd_link_status struct
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param msg The MAVLink message to compress the data into
* @param isbd_link_status C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_isbd_link_status_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_isbd_link_status_t* isbd_link_status)
{
return mavlink_msg_isbd_link_status_pack(system_id, component_id, msg, isbd_link_status->timestamp, isbd_link_status->last_heartbeat, isbd_link_status->failed_sessions, isbd_link_status->successful_sessions, isbd_link_status->signal_quality, isbd_link_status->ring_pending, isbd_link_status->tx_session_pending, isbd_link_status->rx_session_pending);
}
/**
* @brief Encode a isbd_link_status struct on a channel
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param chan The MAVLink channel this message will be sent over
* @param msg The MAVLink message to compress the data into
* @param isbd_link_status C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_isbd_link_status_encode_chan(uint8_t system_id, uint8_t component_id, uint8_t chan, mavlink_message_t* msg, const mavlink_isbd_link_status_t* isbd_link_status)
{
return mavlink_msg_isbd_link_status_pack_chan(system_id, component_id, chan, msg, isbd_link_status->timestamp, isbd_link_status->last_heartbeat, isbd_link_status->failed_sessions, isbd_link_status->successful_sessions, isbd_link_status->signal_quality, isbd_link_status->ring_pending, isbd_link_status->tx_session_pending, isbd_link_status->rx_session_pending);
}
/**
* @brief Encode a isbd_link_status struct with provided status structure
*
* @param system_id ID of this system
* @param component_id ID of this component (e.g. 200 for IMU)
* @param status MAVLink status structure
* @param msg The MAVLink message to compress the data into
* @param isbd_link_status C-struct to read the message contents from
*/
static inline uint16_t mavlink_msg_isbd_link_status_encode_status(uint8_t system_id, uint8_t component_id, mavlink_status_t* _status, mavlink_message_t* msg, const mavlink_isbd_link_status_t* isbd_link_status)
{
return mavlink_msg_isbd_link_status_pack_status(system_id, component_id, _status, msg, isbd_link_status->timestamp, isbd_link_status->last_heartbeat, isbd_link_status->failed_sessions, isbd_link_status->successful_sessions, isbd_link_status->signal_quality, isbd_link_status->ring_pending, isbd_link_status->tx_session_pending, isbd_link_status->rx_session_pending);
}
/**
* @brief Send a isbd_link_status message
* @param chan MAVLink channel to send the message
*
* @param timestamp [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param last_heartbeat [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
* @param failed_sessions Number of failed SBD sessions.
* @param successful_sessions Number of successful SBD sessions.
* @param signal_quality Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.
* @param ring_pending 1: Ring call pending, 0: No call pending.
* @param tx_session_pending 1: Transmission session pending, 0: No transmission session pending.
* @param rx_session_pending 1: Receiving session pending, 0: No receiving session pending.
*/
#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS
static inline void mavlink_msg_isbd_link_status_send(mavlink_channel_t chan, uint64_t timestamp, uint64_t last_heartbeat, uint16_t failed_sessions, uint16_t successful_sessions, uint8_t signal_quality, uint8_t ring_pending, uint8_t tx_session_pending, uint8_t rx_session_pending)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char buf[MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN];
_mav_put_uint64_t(buf, 0, timestamp);
_mav_put_uint64_t(buf, 8, last_heartbeat);
_mav_put_uint16_t(buf, 16, failed_sessions);
_mav_put_uint16_t(buf, 18, successful_sessions);
_mav_put_uint8_t(buf, 20, signal_quality);
_mav_put_uint8_t(buf, 21, ring_pending);
_mav_put_uint8_t(buf, 22, tx_session_pending);
_mav_put_uint8_t(buf, 23, rx_session_pending);
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS, buf, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#else
mavlink_isbd_link_status_t packet;
packet.timestamp = timestamp;
packet.last_heartbeat = last_heartbeat;
packet.failed_sessions = failed_sessions;
packet.successful_sessions = successful_sessions;
packet.signal_quality = signal_quality;
packet.ring_pending = ring_pending;
packet.tx_session_pending = tx_session_pending;
packet.rx_session_pending = rx_session_pending;
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS, (const char *)&packet, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#endif
}
/**
* @brief Send a isbd_link_status message
* @param chan MAVLink channel to send the message
* @param struct The MAVLink struct to serialize
*/
static inline void mavlink_msg_isbd_link_status_send_struct(mavlink_channel_t chan, const mavlink_isbd_link_status_t* isbd_link_status)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
mavlink_msg_isbd_link_status_send(chan, isbd_link_status->timestamp, isbd_link_status->last_heartbeat, isbd_link_status->failed_sessions, isbd_link_status->successful_sessions, isbd_link_status->signal_quality, isbd_link_status->ring_pending, isbd_link_status->tx_session_pending, isbd_link_status->rx_session_pending);
#else
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS, (const char *)isbd_link_status, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#endif
}
#if MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN <= MAVLINK_MAX_PAYLOAD_LEN
/*
This variant of _send() can be used to save stack space by reusing
memory from the receive buffer. The caller provides a
mavlink_message_t which is the size of a full mavlink message. This
is usually the receive buffer for the channel, and allows a reply to an
incoming message with minimum stack space usage.
*/
static inline void mavlink_msg_isbd_link_status_send_buf(mavlink_message_t *msgbuf, mavlink_channel_t chan, uint64_t timestamp, uint64_t last_heartbeat, uint16_t failed_sessions, uint16_t successful_sessions, uint8_t signal_quality, uint8_t ring_pending, uint8_t tx_session_pending, uint8_t rx_session_pending)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
char *buf = (char *)msgbuf;
_mav_put_uint64_t(buf, 0, timestamp);
_mav_put_uint64_t(buf, 8, last_heartbeat);
_mav_put_uint16_t(buf, 16, failed_sessions);
_mav_put_uint16_t(buf, 18, successful_sessions);
_mav_put_uint8_t(buf, 20, signal_quality);
_mav_put_uint8_t(buf, 21, ring_pending);
_mav_put_uint8_t(buf, 22, tx_session_pending);
_mav_put_uint8_t(buf, 23, rx_session_pending);
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS, buf, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#else
mavlink_isbd_link_status_t *packet = (mavlink_isbd_link_status_t *)msgbuf;
packet->timestamp = timestamp;
packet->last_heartbeat = last_heartbeat;
packet->failed_sessions = failed_sessions;
packet->successful_sessions = successful_sessions;
packet->signal_quality = signal_quality;
packet->ring_pending = ring_pending;
packet->tx_session_pending = tx_session_pending;
packet->rx_session_pending = rx_session_pending;
_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_ISBD_LINK_STATUS, (const char *)packet, MAVLINK_MSG_ID_ISBD_LINK_STATUS_MIN_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN, MAVLINK_MSG_ID_ISBD_LINK_STATUS_CRC);
#endif
}
#endif
#endif
// MESSAGE ISBD_LINK_STATUS UNPACKING
/**
* @brief Get field timestamp from isbd_link_status message
*
* @return [us] Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
*/
static inline uint64_t mavlink_msg_isbd_link_status_get_timestamp(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint64_t(msg, 0);
}
/**
* @brief Get field last_heartbeat from isbd_link_status message
*
* @return [us] Timestamp of the last successful sbd session. The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude of the number.
*/
static inline uint64_t mavlink_msg_isbd_link_status_get_last_heartbeat(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint64_t(msg, 8);
}
/**
* @brief Get field failed_sessions from isbd_link_status message
*
* @return Number of failed SBD sessions.
*/
static inline uint16_t mavlink_msg_isbd_link_status_get_failed_sessions(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 16);
}
/**
* @brief Get field successful_sessions from isbd_link_status message
*
* @return Number of successful SBD sessions.
*/
static inline uint16_t mavlink_msg_isbd_link_status_get_successful_sessions(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint16_t(msg, 18);
}
/**
* @brief Get field signal_quality from isbd_link_status message
*
* @return Signal quality equal to the number of bars displayed on the ISU signal strength indicator. Range is 0 to 5, where 0 indicates no signal and 5 indicates maximum signal strength.
*/
static inline uint8_t mavlink_msg_isbd_link_status_get_signal_quality(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint8_t(msg, 20);
}
/**
* @brief Get field ring_pending from isbd_link_status message
*
* @return 1: Ring call pending, 0: No call pending.
*/
static inline uint8_t mavlink_msg_isbd_link_status_get_ring_pending(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint8_t(msg, 21);
}
/**
* @brief Get field tx_session_pending from isbd_link_status message
*
* @return 1: Transmission session pending, 0: No transmission session pending.
*/
static inline uint8_t mavlink_msg_isbd_link_status_get_tx_session_pending(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint8_t(msg, 22);
}
/**
* @brief Get field rx_session_pending from isbd_link_status message
*
* @return 1: Receiving session pending, 0: No receiving session pending.
*/
static inline uint8_t mavlink_msg_isbd_link_status_get_rx_session_pending(const mavlink_message_t* msg)
{
return _MAV_RETURN_uint8_t(msg, 23);
}
/**
* @brief Decode a isbd_link_status message into a struct
*
* @param msg The message to decode
* @param isbd_link_status C-struct to decode the message contents into
*/
static inline void mavlink_msg_isbd_link_status_decode(const mavlink_message_t* msg, mavlink_isbd_link_status_t* isbd_link_status)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
isbd_link_status->timestamp = mavlink_msg_isbd_link_status_get_timestamp(msg);
isbd_link_status->last_heartbeat = mavlink_msg_isbd_link_status_get_last_heartbeat(msg);
isbd_link_status->failed_sessions = mavlink_msg_isbd_link_status_get_failed_sessions(msg);
isbd_link_status->successful_sessions = mavlink_msg_isbd_link_status_get_successful_sessions(msg);
isbd_link_status->signal_quality = mavlink_msg_isbd_link_status_get_signal_quality(msg);
isbd_link_status->ring_pending = mavlink_msg_isbd_link_status_get_ring_pending(msg);
isbd_link_status->tx_session_pending = mavlink_msg_isbd_link_status_get_tx_session_pending(msg);
isbd_link_status->rx_session_pending = mavlink_msg_isbd_link_status_get_rx_session_pending(msg);
#else
uint8_t len = msg->len < MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN? msg->len : MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN;
memset(isbd_link_status, 0, MAVLINK_MSG_ID_ISBD_LINK_STATUS_LEN);
memcpy(isbd_link_status, _MAV_PAYLOAD(msg), len);
#endif
}