admin
dac37fd077
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
1.2 KiB
1.2 KiB
Board - FLYWOOF411
Note: This board used to be sold as a 'NOX F4' but is now an updated version similar to a Flywoo F411
Banggood Specification:
- Model: Upgrade Betaflight F4 Noxe V1
- Version: Acro Version / Deluxe Version
- Acro Version: Without Barometer and Blackbox
- Deluxe Version: With Barometer and Blackbox
- CPU: STM32F411C
- MPU: MPU6000
- Input Voltage: Support 2-6S Lipo Input
- Built-In Betaflight OSD
- Built-in 5V @ 2.5A BEC & 8V @ 3A BEC
- 3.3V
- 4.5V powered by USB
- DShot, Proshot ESC
- Support Spektrum 1024 /2048 , SBUS, IBUS, PPM
- Built in flash for blackbox 16MB
- Support WS2812 LED strip
- Size: 27x27mm
- Mounting Hole: 20x20mm , M2.5
- Weight: 4.3g
- DSM / IBUS/SBUS Receiver, choose UART RX2
- PPM Receiver, don't need choose UART Port