Sync inav to Gitea

lib/main/STM32H7/Drivers/BSP/Components/stmpe811/stmpe811_reg.h

@@ -0,0 +1,162 @@
+/**
+  ******************************************************************************
+  * @file    stmpe811_reg.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the
+  *          stmpe811.c IO expander registers driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STMPE811_REG_H
+#define STMPE811_REG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif   
+
+#include <cmsis_compiler.h>
+
+/** @addtogroup BSP
+  * @{
+  */ 
+
+/** @addtogroup Components
+  * @{
+  */
+    
+/** @addtogroup STMPE811
+  * @{
+  */    
+   
+/** @addtogroup STMPE811_Exported_Constants
+  * @{
+  */ 
+    
+/* Identification registers & System Control */ 
+#define STMPE811_CHP_ID_LSB_REG         0x00U
+#define STMPE811_CHP_ID_MSB_REG         0x01U
+#define STMPE811_ID_VER_REG             0x02U
+   
+/* General Control Registers */ 
+#define STMPE811_SYS_CTRL1_REG          0x03U
+#define STMPE811_SYS_CTRL2_REG          0x04U
+#define STMPE811_SPI_CFG_REG            0x08U 
+
+/* Interrupt system Registers */ 
+#define STMPE811_INT_CTRL_REG           0x09U
+#define STMPE811_INT_EN_REG             0x0AU
+#define STMPE811_INT_STA_REG            0x0BU
+#define STMPE811_IO_INT_EN_REG          0x0CU
+#define STMPE811_IO_INT_STA_REG         0x0DU
+
+/* IO Registers */ 
+#define STMPE811_IO_SET_PIN_REG         0x10U
+#define STMPE811_IO_CLR_PIN_REG         0x11U
+#define STMPE811_IO_MP_STA_REG          0x12U
+#define STMPE811_IO_DIR_REG             0x13U
+#define STMPE811_IO_ED_REG              0x14U
+#define STMPE811_IO_RE_REG              0x15U
+#define STMPE811_IO_FE_REG              0x16U
+#define STMPE811_IO_AF_REG              0x17U
+
+/* ADC Registers */ 
+#define STMPE811_ADC_INT_EN_REG         0x0EU
+#define STMPE811_ADC_INT_STA_REG        0x0FU
+#define STMPE811_ADC_CTRL1_REG          0x20U
+#define STMPE811_ADC_CTRL2_REG          0x21U
+#define STMPE811_ADC_CAPT_REG           0x22U
+#define STMPE811_ADC_DATA_CH0_REG       0x30U 
+#define STMPE811_ADC_DATA_CH1_REG       0x32U 
+#define STMPE811_ADC_DATA_CH2_REG       0x34U 
+#define STMPE811_ADC_DATA_CH3_REG       0x36U 
+#define STMPE811_ADC_DATA_CH4_REG       0x38U 
+#define STMPE811_ADC_DATA_CH5_REG       0x3AU 
+#define STMPE811_ADC_DATA_CH6_REG       0x3BU 
+#define STMPE811_ADC_DATA_CH7_REG       0x3CU 
+
+/* Touch Screen Registers */ 
+#define STMPE811_TSC_CTRL_REG           0x40U
+#define STMPE811_TSC_CFG_REG            0x41U
+#define STMPE811_WDW_TR_X_REG           0x42U 
+#define STMPE811_WDW_TR_Y_REG           0x44U
+#define STMPE811_WDW_BL_X_REG           0x46U
+#define STMPE811_WDW_BL_Y_REG           0x48U
+#define STMPE811_FIFO_TH_REG            0x4AU
+#define STMPE811_FIFO_STA_REG           0x4BU
+#define STMPE811_FIFO_SIZE_REG          0x4CU
+#define STMPE811_TSC_DATA_X_REG         0x4DU 
+#define STMPE811_TSC_DATA_Y_REG         0x4FU
+#define STMPE811_TSC_DATA_Z_REG         0x51U
+#define STMPE811_TSC_DATA_XYZ_REG       0x52U 
+#define STMPE811_TSC_FRACT_XYZ_REG      0x56U
+#define STMPE811_TSC_DATA_INC_REG       0x57U
+#define STMPE811_TSC_DATA_NON_INC_REG   0xD7U
+#define STMPE811_TSC_I_DRIVE_REG        0x58U
+#define STMPE811_TSC_SHIELD_REG         0x59U
+
+/**
+  * @}
+  */ 
+   
+/** @addtogroup STMPE811_Exported_Types
+  * @{
+  */
+
+typedef int32_t (*STMPE811_Write_Func)(void *, uint16_t, uint8_t*, uint16_t);
+typedef int32_t (*STMPE811_Read_Func) (void *, uint16_t, uint8_t*, uint16_t);
+
+typedef struct
+{
+  STMPE811_Write_Func   WriteReg;
+  STMPE811_Read_Func    ReadReg;
+  void                  *handle;
+  /* Internal resources */
+} stmpe811_ctx_t;
+
+/**
+  * @}
+  */ 
+
+/** @addtgroup STMPE811_Exported_Functions
+  * @{
+  */
+int32_t stmpe811_write_reg(stmpe811_ctx_t *ctx, uint16_t reg, uint8_t *data, uint16_t length);
+int32_t stmpe811_read_reg(stmpe811_ctx_t *ctx, uint16_t reg, uint8_t *data, uint16_t length);
+
+/**
+  * @}
+  */ 
+#ifdef __cplusplus
+}
+#endif
+#endif /* STMPE811_REG_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/