Sync inav to Gitea
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
Make sure docs are updated / settings_md (push) Canceled after 0s
Build firmware / test (push) Canceled after 0s
Build firmware / build-SITL-Windows (push) Canceled after 0s
Build firmware / build-SITL-Mac (push) Canceled after 0s
Build firmware / build-SITL-Linux (push) Canceled after 0s
Build firmware / build-SITL-Linux-arm64 (push) Canceled after 0s
Build firmware / upload-artifacts (push) Canceled after 0s
Build firmware / build-single-target (push) Canceled after 0s
Build firmware / build (9) (push) Canceled after 0s
Build firmware / build (8) (push) Canceled after 0s
Build firmware / build (7) (push) Canceled after 0s
Build firmware / build (6) (push) Canceled after 0s
Build firmware / build (5) (push) Canceled after 0s
Build firmware / build (4) (push) Canceled after 0s
Build firmware / build (3) (push) Canceled after 0s
Build firmware / build (2) (push) Canceled after 0s
Build firmware / build (14) (push) Canceled after 0s
Build firmware / build (13) (push) Canceled after 0s
Build firmware / build (12) (push) Canceled after 0s
Build firmware / build (11) (push) Canceled after 0s
Build firmware / build (10) (push) Canceled after 0s
Build firmware / build (1) (push) Canceled after 0s
Build firmware / build (0) (push) Canceled after 0s
Build firmware / detect (push) Canceled after 0s
Build pre-release / build (push) Canceled after 0s
Build pre-release / Release (push) Canceled after 0s
This commit is contained in:
@@ -0,0 +1,37 @@
|
||||
---
|
||||
name: 'Bug report'
|
||||
about: 'Create a report to help us improve the quality of our software'
|
||||
title: ''
|
||||
labels: ''
|
||||
assignees: ''
|
||||
---
|
||||
|
||||
**Caution**
|
||||
|
||||
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
|
||||
For any other problem related to the STM32 product, the performance, the hardware characteristics and boards, the tools the environment in general, please post your report to the **ST Community** in the STM32 MCUs dedicated [page](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
|
||||
|
||||
**Describe the set-up**
|
||||
|
||||
* The board (either ST RPN reference or your custom board)
|
||||
* IDE or at least the compiler and its version
|
||||
|
||||
**Describe the bug (skip if none)**
|
||||
|
||||
A clear and concise description of what the bug is.
|
||||
|
||||
**How to reproduce the bug (skip if none)**
|
||||
|
||||
1. Indicate the global behavior of your application project
|
||||
2. List the modules that you suspect to be the cause of the problem (Drivers, BSP, MW...)
|
||||
3. Describe the use case that generates the problem
|
||||
4. How we can reproduce the problem
|
||||
|
||||
|
||||
**Additional context**
|
||||
|
||||
If you have a first analysis, an enhancement, a fix or a patch, thank you to share your proposal.
|
||||
|
||||
**Screenshots**
|
||||
|
||||
If applicable, add screenshots to help explain your problem.
|
||||
+3
@@ -0,0 +1,3 @@
|
||||
## IMPORTANT INFORMATION
|
||||
|
||||
Pull-requests are **not** accepted on this repository. Please use issues to report any bug or request.
|
||||
@@ -0,0 +1,73 @@
|
||||
# Contributor Covenant Code of Conduct
|
||||
|
||||
## Our Pledge
|
||||
|
||||
In the interest of fostering an open and welcoming environment, we as
|
||||
contributors and maintainers pledge to making participation in our project and
|
||||
our community a harassment-free experience for everyone, regardless of age, body
|
||||
size, disability, ethnicity, sex characteristics, gender identity and expression,
|
||||
level of experience, education, socio-economic status, nationality, personal
|
||||
appearance, race, religion, or sexual identity and orientation.
|
||||
|
||||
## Our Standards
|
||||
|
||||
Examples of behavior that contributes to creating a positive environment
|
||||
include:
|
||||
|
||||
* Using welcoming and inclusive language
|
||||
* Being respectful of differing viewpoints and experiences
|
||||
* Gracefully accepting constructive criticism
|
||||
* Focusing on what is best for the community
|
||||
* Showing empathy towards other community members
|
||||
|
||||
Examples of unacceptable behavior by participants include:
|
||||
|
||||
* The use of sexualized language or imagery and unwelcome sexual attention or
|
||||
advances
|
||||
* Trolling, insulting/derogatory comments, and personal or political attacks
|
||||
* Public or private harassment
|
||||
* Publishing others' private information, such as a physical or electronic
|
||||
address, without explicit permission
|
||||
* Other conduct which could reasonably be considered inappropriate in a
|
||||
professional setting
|
||||
|
||||
## Our Responsibilities
|
||||
|
||||
Project maintainers are responsible for clarifying the standards of acceptable
|
||||
behavior and are expected to take appropriate and fair corrective action in
|
||||
response to any instances of unacceptable behavior.
|
||||
|
||||
Project maintainers have the right and responsibility to remove, edit, or
|
||||
reject comments, commits, code, wiki edits, issues, and other contributions
|
||||
that are not aligned to this Code of Conduct, or to ban temporarily or
|
||||
permanently any contributor for other behaviors that they deem inappropriate,
|
||||
threatening, offensive, or harmful.
|
||||
|
||||
## Scope
|
||||
|
||||
This Code of Conduct applies both within project spaces and in public spaces
|
||||
when an individual is representing the project or its community. Examples of
|
||||
representing a project or community include using an official project e-mail
|
||||
address, posting via an official social media account, or acting as an appointed
|
||||
representative at an online or offline event. Representation of a project may be
|
||||
further defined and clarified by project maintainers.
|
||||
|
||||
## Enforcement
|
||||
|
||||
Instances of abusive, harassing, or otherwise unacceptable behavior may be
|
||||
reported by contacting the project team via this [link](https://www.st.com/content/st_com/en/contact-us.html).
|
||||
All complaints will be reviewed and investigated and will result in a response that
|
||||
is deemed necessary and appropriate to the circumstances. The project team is
|
||||
obligated to maintain confidentiality with regard to the reporter of an incident.
|
||||
Further details of specific enforcement policies may be posted separately.
|
||||
|
||||
Project maintainers who do not follow or enforce the Code of Conduct in good
|
||||
faith may face temporary or permanent repercussions as determined by other
|
||||
members of the project's leadership.
|
||||
|
||||
## Attribution
|
||||
|
||||
This Code of Conduct is adapted from the [Contributor Covenant](https://www.contributor-covenant.org), version 1.4,
|
||||
available [here](https://www.contributor-covenant.org/version/1/4/code-of-conduct.html).
|
||||
|
||||
For answers to common questions about this code of conduct, see the [FAQ section](https://www.contributor-covenant.org/faq).
|
||||
@@ -0,0 +1,28 @@
|
||||
## Contributing guide
|
||||
|
||||
This document serves as a checklist before contributing to this repository.
|
||||
It includes links to read up on if topics are unclear to you.
|
||||
|
||||
This guide mainly focuses on steps to be followed to submit an issue or a pull-request.
|
||||
|
||||
### 1. Before opening an issue
|
||||
|
||||
To report a bug or a request please file an issue in the right repository
|
||||
(example for [lan8742](https://github.com/STMicroelectronics/lan8742/issues/new/choose)).
|
||||
|
||||
Please check the following boxes before posting an issue:
|
||||
- [ ] `Make sure you are using the latest commit (major releases are tagged, but corrections are available as new commits).`
|
||||
- [ ] `Make sure your issue is a question/feedback/suggestions RELATED TO the software provided in this repository.` Otherwise, it should be submitted to the ST Community under the MCU topic [page](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
|
||||
- [ ] `Make sure your issue is not already reported/fixed on GitHub or discussed on a previous issue.` Please refer to this [dashboard](https://github.com/orgs/STMicroelectronics/projects/2) for the list of issues and pull-requests. Do not forget to browse into the **closed** issues.
|
||||
|
||||
### 2. Posting the issue
|
||||
When you have checked the previous boxes. You will find two templates (Bug Report or Other Issue) available in the **Issues** tab of the repository.
|
||||
|
||||
### 3. Pull Requests
|
||||
Pull-requests are **not** accepted on this repository. Please use **issues** to report any bug or request.
|
||||
|
||||
### 4. How to proceed
|
||||
|
||||
* We recommend to engage first a communication thru an issue, in order to present your proposal. Just to confirm that it corresponds to STMicroelectronics domain or scope.
|
||||
* Then fork the project to your GitHub account to further develop your contribution. Please use the latest commit version.
|
||||
* Please, submit one Pull Request for one new feature or proposal. This will ease the analysis and the final merge if accepted.
|
||||
@@ -0,0 +1,27 @@
|
||||
Copyright 2017(-2019) STMicroelectronics.
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
1. Redistributions of source code must retain the above copyright notice, this
|
||||
list of conditions and the following disclaimer.
|
||||
|
||||
2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
this list of conditions and the following disclaimer in the documentation and/or
|
||||
other materials provided with the distribution.
|
||||
|
||||
3. Neither the name of the copyright holder nor the names of its contributors
|
||||
may be used to endorse or promote products derived from this software without
|
||||
specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||||
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
@@ -0,0 +1,40 @@
|
||||
# BSP LAN8742 Component
|
||||
|
||||
## Overview
|
||||
|
||||
**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
|
||||
|
||||
**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series.
|
||||
* The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
|
||||
* The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio.
|
||||
* The BSP drivers of each evaluation, demonstration or nucleo board provided for this STM32 series.
|
||||
* A consistent set of middleware components such as RTOS, USB, FatFS, graphics, touch sensing library...
|
||||
* A full set of software projects (basic examples, applications, and demonstrations) for each board provided for this STM32 series.
|
||||
|
||||
Two models of publication are proposed for the STM32Cube embedded software:
|
||||
* The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
|
||||
* The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions.
|
||||
|
||||
## Description
|
||||
|
||||
This **lan8742** MCU component repository is one element **common to all** STM32Cube MCU embedded software packages, providing the **LAN8742** BSP Networking component part.
|
||||
|
||||
## License
|
||||
|
||||
Copyright (c) 2017 STMicroelectronics
|
||||
|
||||
This software component is licensed by STMicroelectronics under the **BSD-3-Clause** license. You may not use this software except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause).
|
||||
|
||||
## Release note
|
||||
|
||||
Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/lan8742/blob/main/Release_Notes.html).
|
||||
|
||||
## Compatibility information
|
||||
|
||||
Please refer to the repository of the BSP **board** driver you are using to know which version of this BSP component driver to use. It is **crucial** that you use a consistent set of versions. It is **crucial** that you use a consistent set of versions as indicated.
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
If you have any issue with the **software content** of this repository, you can file an issue [here](https://github.com/STMicroelectronics/lan8742/issues/new/choose).
|
||||
|
||||
For any other question related to the product, the tools, the environment, you can submit a topic to the [ST Community](https://community.st.com/s/).
|
||||
@@ -0,0 +1,87 @@
|
||||
<!DOCTYPE html>
|
||||
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
|
||||
<head>
|
||||
<meta charset="utf-8" />
|
||||
<meta name="generator" content="pandoc" />
|
||||
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
|
||||
<title>Release Notes for LAN8742 Component Driver</title>
|
||||
<style type="text/css">
|
||||
code{white-space: pre-wrap;}
|
||||
span.smallcaps{font-variant: small-caps;}
|
||||
span.underline{text-decoration: underline;}
|
||||
div.column{display: inline-block; vertical-align: top; width: 50%;}
|
||||
</style>
|
||||
<link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
|
||||
<!--[if lt IE 9]>
|
||||
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
|
||||
<![endif]-->
|
||||
<link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
|
||||
</head>
|
||||
<body>
|
||||
<div class="row">
|
||||
<div class="col-sm-12 col-lg-4">
|
||||
<center>
|
||||
<h1 id="release-notes-for">Release Notes for</h1>
|
||||
<h1 id="lan8742-phy-component-driver"><mark>LAN8742 PHY Component Driver</mark></h1>
|
||||
<p>Copyright © 2017 STMicroelectronics<br />
|
||||
</p>
|
||||
<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo_2020.png" alt="ST logo" /></a>
|
||||
</center>
|
||||
<h1 id="purpose">Purpose</h1>
|
||||
<p>This driver provides a set of Ethernet PHY functions offered by LAN8742 component</p>
|
||||
</div>
|
||||
<div class="col-sm-12 col-lg-8">
|
||||
<h1 id="update-history">Update History</h1>
|
||||
<div class="collapse">
|
||||
<input type="checkbox" id="collapse-section5" checked aria-hidden="true"> <label for="collapse-section5" aria-hidden="true"><strong>V1.0.4 / 26-January-2024</strong></label>
|
||||
<div>
|
||||
<h2 id="main-changes">Main Changes</h2>
|
||||
<ul>
|
||||
<li>Remove unnecessary Software reset from LAN8742_Init function</li>
|
||||
</ul>
|
||||
</div>
|
||||
</div>
|
||||
<div class="collapse">
|
||||
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.0.3 / 28-June-2023</strong></label>
|
||||
<div>
|
||||
<h2 id="main-changes-1">Main Changes</h2>
|
||||
<ul>
|
||||
<li>Update license</li>
|
||||
</ul>
|
||||
</div>
|
||||
</div>
|
||||
<div class="collapse">
|
||||
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true"><strong>V1.0.2 / 04-March-2022</strong></label>
|
||||
<div>
|
||||
<h2 id="main-changes-2">Main Changes</h2>
|
||||
<ul>
|
||||
<li>Update license notice</li>
|
||||
<li>Fix Spelling issues</li>
|
||||
</ul>
|
||||
</div>
|
||||
</div>
|
||||
<div class="collapse">
|
||||
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.0.1 / 23-November-2019</strong></label>
|
||||
<div>
|
||||
<h2 id="main-changes-3">Main Changes</h2>
|
||||
<ul>
|
||||
<li>Update st_logo.png inclusion path in Release notes</li>
|
||||
</ul>
|
||||
</div>
|
||||
</div>
|
||||
<div class="collapse">
|
||||
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 08-March-2017</strong></label>
|
||||
<div>
|
||||
<h2 id="main-changes-4">Main Changes</h2>
|
||||
<ul>
|
||||
<li>First official release of <strong>LAN8742</strong> PHY driver</li>
|
||||
</ul>
|
||||
</div>
|
||||
</div>
|
||||
</div>
|
||||
</div>
|
||||
<footer class="sticky">
|
||||
For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <span style="font-color: blue;"><a href="http://www.st.com/STM32">www.st.com</a></span>
|
||||
</footer>
|
||||
</body>
|
||||
</html>
|
||||
@@ -0,0 +1,31 @@
|
||||
# Report potential product security vulnerabilities
|
||||
|
||||
ST places a high priority on security, and our Product Security Incident
|
||||
Response Team (PSIRT) is committed to rapidly addressing potential security
|
||||
vulnerabilities affecting our products. PSIRT's long history and vast experience
|
||||
in security allows ST to perform clear analyses and provide appropriate guidance
|
||||
on mitigations and solutions when applicable.
|
||||
|
||||
If you wish to report potential security vulnerabilities regarding our products,
|
||||
**please do not report them through public GitHub issues.** Instead, we
|
||||
encourage you to report them to our ST PSIRT following the process described at:
|
||||
**https://www.st.com/content/st_com/en/security/report-vulnerabilities.html**
|
||||
|
||||
### IMPORTANT - READ CAREFULLY:
|
||||
|
||||
STMicroelectronics International N.V., on behalf of itself, its affiliates and
|
||||
subsidiaries, (collectively “ST”) takes all potential security vulnerability
|
||||
reports or other related communications (“Report(s)”) seriously. In order to
|
||||
review Your Report (the terms “You” and “Yours” include your employer, and all
|
||||
affiliates, subsidiaries and related persons or entities) and take actions as
|
||||
deemed appropriate, ST requires that we have the rights and Your permission to
|
||||
do so.
|
||||
|
||||
As such, by submitting Your Report to ST, You agree that You have the right to
|
||||
do so, and You grant to ST the rights to use the Report for purposes related to
|
||||
security vulnerability analysis, testing, correction, patching, reporting and
|
||||
any other related purpose or function.
|
||||
|
||||
By submitting Your Report, You agree that ST’s
|
||||
[Privacy Policy](https://www.st.com/content/st_com/en/common/privacy-portal.html)
|
||||
applies to all related communications.
|
||||
@@ -0,0 +1,2 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
|
||||
|
After Width: | Height: | Size: 830 B |
@@ -0,0 +1,2 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
|
||||
|
After Width: | Height: | Size: 1.9 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 4.0 KiB |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
After Width: | Height: | Size: 7.3 KiB |
@@ -0,0 +1,613 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file lan8742.c
|
||||
* @author MCD Application Team
|
||||
* @brief This file provides a set of functions needed to manage the LAN742
|
||||
* PHY devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "lan8742.h"
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup Component
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742 LAN8742
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @defgroup LAN8742_Private_Defines LAN8742 Private Defines
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_MAX_DEV_ADDR ((uint32_t)31U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup LAN8742_Private_Functions LAN8742 Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Register IO functions to component object
|
||||
* @param pObj: device object of LAN8742_Object_t.
|
||||
* @param ioctx: holds device IO functions.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_ERROR if missing mandatory function
|
||||
*/
|
||||
int32_t LAN8742_RegisterBusIO(lan8742_Object_t *pObj, lan8742_IOCtx_t *ioctx)
|
||||
{
|
||||
if(!pObj || !ioctx->ReadReg || !ioctx->WriteReg || !ioctx->GetTick)
|
||||
{
|
||||
return LAN8742_STATUS_ERROR;
|
||||
}
|
||||
|
||||
pObj->IO.Init = ioctx->Init;
|
||||
pObj->IO.DeInit = ioctx->DeInit;
|
||||
pObj->IO.ReadReg = ioctx->ReadReg;
|
||||
pObj->IO.WriteReg = ioctx->WriteReg;
|
||||
pObj->IO.GetTick = ioctx->GetTick;
|
||||
|
||||
return LAN8742_STATUS_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initialize the lan8742 and configure the needed hardware resources
|
||||
* @param pObj: device object LAN8742_Object_t.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_ADDRESS_ERROR if cannot find device address
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
*/
|
||||
int32_t LAN8742_Init(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t regvalue = 0, addr = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->Is_Initialized == 0)
|
||||
{
|
||||
if(pObj->IO.Init != 0)
|
||||
{
|
||||
/* GPIO and Clocks initialization */
|
||||
pObj->IO.Init();
|
||||
}
|
||||
|
||||
/* for later check */
|
||||
pObj->DevAddr = LAN8742_MAX_DEV_ADDR + 1;
|
||||
|
||||
/* Get the device address from special mode register */
|
||||
for(addr = 0; addr <= LAN8742_MAX_DEV_ADDR; addr ++)
|
||||
{
|
||||
if(pObj->IO.ReadReg(addr, LAN8742_SMR, ®value) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
/* Can't read from this device address
|
||||
continue with next address */
|
||||
continue;
|
||||
}
|
||||
|
||||
if((regvalue & LAN8742_SMR_PHY_ADDR) == addr)
|
||||
{
|
||||
pObj->DevAddr = addr;
|
||||
status = LAN8742_STATUS_OK;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if(pObj->DevAddr > LAN8742_MAX_DEV_ADDR)
|
||||
{
|
||||
status = LAN8742_STATUS_ADDRESS_ERROR;
|
||||
}
|
||||
|
||||
/* if device address is matched */
|
||||
if(status == LAN8742_STATUS_OK)
|
||||
{
|
||||
pObj->Is_Initialized = 1;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief De-Initialize the lan8742 and it's hardware resources
|
||||
* @param pObj: device object LAN8742_Object_t.
|
||||
* @retval None
|
||||
*/
|
||||
int32_t LAN8742_DeInit(lan8742_Object_t *pObj)
|
||||
{
|
||||
if(pObj->Is_Initialized)
|
||||
{
|
||||
if(pObj->IO.DeInit != 0)
|
||||
{
|
||||
if(pObj->IO.DeInit() < 0)
|
||||
{
|
||||
return LAN8742_STATUS_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
pObj->Is_Initialized = 0;
|
||||
}
|
||||
|
||||
return LAN8742_STATUS_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the LAN8742 power down mode.
|
||||
* @param pObj: device object LAN8742_Object_t.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
|
||||
{
|
||||
readval &= ~LAN8742_BCR_POWER_DOWN;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the LAN8742 power down mode.
|
||||
* @param pObj: device object LAN8742_Object_t.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
|
||||
{
|
||||
readval |= LAN8742_BCR_POWER_DOWN;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Start the auto negotiation process.
|
||||
* @param pObj: device object LAN8742_Object_t.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
|
||||
{
|
||||
readval |= LAN8742_BCR_AUTONEGO_EN;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the link state of LAN8742 device.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param pLinkState: Pointer to link state
|
||||
* @retval LAN8742_STATUS_LINK_DOWN if link is down
|
||||
* LAN8742_STATUS_AUTONEGO_NOTDONE if Auto nego not completed
|
||||
* LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
|
||||
* LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
|
||||
* LAN8742_STATUS_10MBITS_FULLDUPLEX if 10Mb/s FD
|
||||
* LAN8742_STATUS_10MBITS_HALFDUPLEX if 10Mb/s HD
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
|
||||
/* Read Status register */
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0)
|
||||
{
|
||||
return LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
/* Read Status register again */
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0)
|
||||
{
|
||||
return LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
if((readval & LAN8742_BSR_LINK_STATUS) == 0)
|
||||
{
|
||||
/* Return Link Down status */
|
||||
return LAN8742_STATUS_LINK_DOWN;
|
||||
}
|
||||
|
||||
/* Check Auto negotiation */
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) < 0)
|
||||
{
|
||||
return LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
if((readval & LAN8742_BCR_AUTONEGO_EN) != LAN8742_BCR_AUTONEGO_EN)
|
||||
{
|
||||
if(((readval & LAN8742_BCR_SPEED_SELECT) == LAN8742_BCR_SPEED_SELECT) && ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE))
|
||||
{
|
||||
return LAN8742_STATUS_100MBITS_FULLDUPLEX;
|
||||
}
|
||||
else if ((readval & LAN8742_BCR_SPEED_SELECT) == LAN8742_BCR_SPEED_SELECT)
|
||||
{
|
||||
return LAN8742_STATUS_100MBITS_HALFDUPLEX;
|
||||
}
|
||||
else if ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE)
|
||||
{
|
||||
return LAN8742_STATUS_10MBITS_FULLDUPLEX;
|
||||
}
|
||||
else
|
||||
{
|
||||
return LAN8742_STATUS_10MBITS_HALFDUPLEX;
|
||||
}
|
||||
}
|
||||
else /* Auto Nego enabled */
|
||||
{
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_PHYSCSR, &readval) < 0)
|
||||
{
|
||||
return LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
/* Check if auto nego not done */
|
||||
if((readval & LAN8742_PHYSCSR_AUTONEGO_DONE) == 0)
|
||||
{
|
||||
return LAN8742_STATUS_AUTONEGO_NOTDONE;
|
||||
}
|
||||
|
||||
if((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_FD)
|
||||
{
|
||||
return LAN8742_STATUS_100MBITS_FULLDUPLEX;
|
||||
}
|
||||
else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_HD)
|
||||
{
|
||||
return LAN8742_STATUS_100MBITS_HALFDUPLEX;
|
||||
}
|
||||
else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_10BT_FD)
|
||||
{
|
||||
return LAN8742_STATUS_10MBITS_FULLDUPLEX;
|
||||
}
|
||||
else
|
||||
{
|
||||
return LAN8742_STATUS_10MBITS_HALFDUPLEX;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set the link state of LAN8742 device.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param pLinkState: link state can be one of the following
|
||||
* LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
|
||||
* LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
|
||||
* LAN8742_STATUS_10MBITS_FULLDUPLEX if 10Mb/s FD
|
||||
* LAN8742_STATUS_10MBITS_HALFDUPLEX if 10Mb/s HD
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_ERROR if parameter error
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState)
|
||||
{
|
||||
uint32_t bcrvalue = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &bcrvalue) >= 0)
|
||||
{
|
||||
/* Disable link config (Auto nego, speed and duplex) */
|
||||
bcrvalue &= ~(LAN8742_BCR_AUTONEGO_EN | LAN8742_BCR_SPEED_SELECT | LAN8742_BCR_DUPLEX_MODE);
|
||||
|
||||
if(LinkState == LAN8742_STATUS_100MBITS_FULLDUPLEX)
|
||||
{
|
||||
bcrvalue |= (LAN8742_BCR_SPEED_SELECT | LAN8742_BCR_DUPLEX_MODE);
|
||||
}
|
||||
else if (LinkState == LAN8742_STATUS_100MBITS_HALFDUPLEX)
|
||||
{
|
||||
bcrvalue |= LAN8742_BCR_SPEED_SELECT;
|
||||
}
|
||||
else if (LinkState == LAN8742_STATUS_10MBITS_FULLDUPLEX)
|
||||
{
|
||||
bcrvalue |= LAN8742_BCR_DUPLEX_MODE;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Wrong link status parameter */
|
||||
status = LAN8742_STATUS_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
if(status == LAN8742_STATUS_OK)
|
||||
{
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, bcrvalue) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable loopback mode.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
|
||||
{
|
||||
readval |= LAN8742_BCR_LOOPBACK;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable loopback mode.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
|
||||
{
|
||||
readval &= ~LAN8742_BCR_LOOPBACK;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable IT source.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param Interrupt: IT source to be enabled
|
||||
* should be a value or a combination of the following:
|
||||
* LAN8742_WOL_IT
|
||||
* LAN8742_ENERGYON_IT
|
||||
* LAN8742_AUTONEGO_COMPLETE_IT
|
||||
* LAN8742_REMOTE_FAULT_IT
|
||||
* LAN8742_LINK_DOWN_IT
|
||||
* LAN8742_AUTONEGO_LP_ACK_IT
|
||||
* LAN8742_PARALLEL_DETECTION_FAULT_IT
|
||||
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0)
|
||||
{
|
||||
readval |= Interrupt;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable IT source.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param Interrupt: IT source to be disabled
|
||||
* should be a value or a combination of the following:
|
||||
* LAN8742_WOL_IT
|
||||
* LAN8742_ENERGYON_IT
|
||||
* LAN8742_AUTONEGO_COMPLETE_IT
|
||||
* LAN8742_REMOTE_FAULT_IT
|
||||
* LAN8742_LINK_DOWN_IT
|
||||
* LAN8742_AUTONEGO_LP_ACK_IT
|
||||
* LAN8742_PARALLEL_DETECTION_FAULT_IT
|
||||
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
* LAN8742_STATUS_WRITE_ERROR if cannot write to register
|
||||
*/
|
||||
int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0)
|
||||
{
|
||||
readval &= ~Interrupt;
|
||||
|
||||
/* Apply configuration */
|
||||
if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_WRITE_ERROR;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clear IT flag.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param Interrupt: IT flag to be cleared
|
||||
* should be a value or a combination of the following:
|
||||
* LAN8742_WOL_IT
|
||||
* LAN8742_ENERGYON_IT
|
||||
* LAN8742_AUTONEGO_COMPLETE_IT
|
||||
* LAN8742_REMOTE_FAULT_IT
|
||||
* LAN8742_LINK_DOWN_IT
|
||||
* LAN8742_AUTONEGO_LP_ACK_IT
|
||||
* LAN8742_PARALLEL_DETECTION_FAULT_IT
|
||||
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
|
||||
* @retval LAN8742_STATUS_OK if OK
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
*/
|
||||
int32_t LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = LAN8742_STATUS_OK;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) < 0)
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get IT Flag status.
|
||||
* @param pObj: Pointer to device object.
|
||||
* @param Interrupt: IT Flag to be checked,
|
||||
* should be a value or a combination of the following:
|
||||
* LAN8742_WOL_IT
|
||||
* LAN8742_ENERGYON_IT
|
||||
* LAN8742_AUTONEGO_COMPLETE_IT
|
||||
* LAN8742_REMOTE_FAULT_IT
|
||||
* LAN8742_LINK_DOWN_IT
|
||||
* LAN8742_AUTONEGO_LP_ACK_IT
|
||||
* LAN8742_PARALLEL_DETECTION_FAULT_IT
|
||||
* LAN8742_AUTONEGO_PAGE_RECEIVED_IT
|
||||
* @retval 1 IT flag is SET
|
||||
* 0 IT flag is RESET
|
||||
* LAN8742_STATUS_READ_ERROR if cannot read register
|
||||
*/
|
||||
int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt)
|
||||
{
|
||||
uint32_t readval = 0;
|
||||
int32_t status = 0;
|
||||
|
||||
if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) >= 0)
|
||||
{
|
||||
status = ((readval & Interrupt) == Interrupt);
|
||||
}
|
||||
else
|
||||
{
|
||||
status = LAN8742_STATUS_READ_ERROR;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -0,0 +1,446 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file lan8742.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the
|
||||
* lan8742.c PHY driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef LAN8742_H
|
||||
#define LAN8742_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include <stdint.h>
|
||||
|
||||
/** @addtogroup BSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup Component
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742
|
||||
* @{
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup LAN8742_Exported_Constants LAN8742 Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_Registers_Mapping LAN8742 Registers Mapping
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_BCR ((uint16_t)0x0000U)
|
||||
#define LAN8742_BSR ((uint16_t)0x0001U)
|
||||
#define LAN8742_PHYI1R ((uint16_t)0x0002U)
|
||||
#define LAN8742_PHYI2R ((uint16_t)0x0003U)
|
||||
#define LAN8742_ANAR ((uint16_t)0x0004U)
|
||||
#define LAN8742_ANLPAR ((uint16_t)0x0005U)
|
||||
#define LAN8742_ANER ((uint16_t)0x0006U)
|
||||
#define LAN8742_ANNPTR ((uint16_t)0x0007U)
|
||||
#define LAN8742_ANNPRR ((uint16_t)0x0008U)
|
||||
#define LAN8742_MMDACR ((uint16_t)0x000DU)
|
||||
#define LAN8742_MMDAADR ((uint16_t)0x000EU)
|
||||
#define LAN8742_ENCTR ((uint16_t)0x0010U)
|
||||
#define LAN8742_MCSR ((uint16_t)0x0011U)
|
||||
#define LAN8742_SMR ((uint16_t)0x0012U)
|
||||
#define LAN8742_TPDCR ((uint16_t)0x0018U)
|
||||
#define LAN8742_TCSR ((uint16_t)0x0019U)
|
||||
#define LAN8742_SECR ((uint16_t)0x001AU)
|
||||
#define LAN8742_SCSIR ((uint16_t)0x001BU)
|
||||
#define LAN8742_CLR ((uint16_t)0x001CU)
|
||||
#define LAN8742_ISFR ((uint16_t)0x001DU)
|
||||
#define LAN8742_IMR ((uint16_t)0x001EU)
|
||||
#define LAN8742_PHYSCSR ((uint16_t)0x001FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_BCR_Bit_Definition LAN8742 BCR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_BCR_SOFT_RESET ((uint16_t)0x8000U)
|
||||
#define LAN8742_BCR_LOOPBACK ((uint16_t)0x4000U)
|
||||
#define LAN8742_BCR_SPEED_SELECT ((uint16_t)0x2000U)
|
||||
#define LAN8742_BCR_AUTONEGO_EN ((uint16_t)0x1000U)
|
||||
#define LAN8742_BCR_POWER_DOWN ((uint16_t)0x0800U)
|
||||
#define LAN8742_BCR_ISOLATE ((uint16_t)0x0400U)
|
||||
#define LAN8742_BCR_RESTART_AUTONEGO ((uint16_t)0x0200U)
|
||||
#define LAN8742_BCR_DUPLEX_MODE ((uint16_t)0x0100U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_BSR_Bit_Definition LAN8742 BSR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_BSR_100BASE_T4 ((uint16_t)0x8000U)
|
||||
#define LAN8742_BSR_100BASE_TX_FD ((uint16_t)0x4000U)
|
||||
#define LAN8742_BSR_100BASE_TX_HD ((uint16_t)0x2000U)
|
||||
#define LAN8742_BSR_10BASE_T_FD ((uint16_t)0x1000U)
|
||||
#define LAN8742_BSR_10BASE_T_HD ((uint16_t)0x0800U)
|
||||
#define LAN8742_BSR_100BASE_T2_FD ((uint16_t)0x0400U)
|
||||
#define LAN8742_BSR_100BASE_T2_HD ((uint16_t)0x0200U)
|
||||
#define LAN8742_BSR_EXTENDED_STATUS ((uint16_t)0x0100U)
|
||||
#define LAN8742_BSR_AUTONEGO_CPLT ((uint16_t)0x0020U)
|
||||
#define LAN8742_BSR_REMOTE_FAULT ((uint16_t)0x0010U)
|
||||
#define LAN8742_BSR_AUTONEGO_ABILITY ((uint16_t)0x0008U)
|
||||
#define LAN8742_BSR_LINK_STATUS ((uint16_t)0x0004U)
|
||||
#define LAN8742_BSR_JABBER_DETECT ((uint16_t)0x0002U)
|
||||
#define LAN8742_BSR_EXTENDED_CAP ((uint16_t)0x0001U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_PHYI1R_Bit_Definition LAN8742 PHYI1R Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_PHYI1R_OUI_3_18 ((uint16_t)0xFFFFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_PHYI2R_Bit_Definition LAN8742 PHYI2R Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_PHYI2R_OUI_19_24 ((uint16_t)0xFC00U)
|
||||
#define LAN8742_PHYI2R_MODEL_NBR ((uint16_t)0x03F0U)
|
||||
#define LAN8742_PHYI2R_REVISION_NBR ((uint16_t)0x000FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ANAR_Bit_Definition LAN8742 ANAR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ANAR_NEXT_PAGE ((uint16_t)0x8000U)
|
||||
#define LAN8742_ANAR_REMOTE_FAULT ((uint16_t)0x2000U)
|
||||
#define LAN8742_ANAR_PAUSE_OPERATION ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ANAR_PO_NOPAUSE ((uint16_t)0x0000U)
|
||||
#define LAN8742_ANAR_PO_SYMMETRIC_PAUSE ((uint16_t)0x0400U)
|
||||
#define LAN8742_ANAR_PO_ASYMMETRIC_PAUSE ((uint16_t)0x0800U)
|
||||
#define LAN8742_ANAR_PO_ADVERTISE_SUPPORT ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ANAR_100BASE_TX_FD ((uint16_t)0x0100U)
|
||||
#define LAN8742_ANAR_100BASE_TX ((uint16_t)0x0080U)
|
||||
#define LAN8742_ANAR_10BASE_T_FD ((uint16_t)0x0040U)
|
||||
#define LAN8742_ANAR_10BASE_T ((uint16_t)0x0020U)
|
||||
#define LAN8742_ANAR_SELECTOR_FIELD ((uint16_t)0x000FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ANLPAR_Bit_Definition LAN8742 ANLPAR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ANLPAR_NEXT_PAGE ((uint16_t)0x8000U)
|
||||
#define LAN8742_ANLPAR_REMOTE_FAULT ((uint16_t)0x2000U)
|
||||
#define LAN8742_ANLPAR_PAUSE_OPERATION ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ANLPAR_PO_NOPAUSE ((uint16_t)0x0000U)
|
||||
#define LAN8742_ANLPAR_PO_SYMMETRIC_PAUSE ((uint16_t)0x0400U)
|
||||
#define LAN8742_ANLPAR_PO_ASYMMETRIC_PAUSE ((uint16_t)0x0800U)
|
||||
#define LAN8742_ANLPAR_PO_ADVERTISE_SUPPORT ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ANLPAR_100BASE_TX_FD ((uint16_t)0x0100U)
|
||||
#define LAN8742_ANLPAR_100BASE_TX ((uint16_t)0x0080U)
|
||||
#define LAN8742_ANLPAR_10BASE_T_FD ((uint16_t)0x0040U)
|
||||
#define LAN8742_ANLPAR_10BASE_T ((uint16_t)0x0020U)
|
||||
#define LAN8742_ANLPAR_SELECTOR_FIELD ((uint16_t)0x000FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ANER_Bit_Definition LAN8742 ANER Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ANER_RX_NP_LOCATION_ABLE ((uint16_t)0x0040U)
|
||||
#define LAN8742_ANER_RX_NP_STORAGE_LOCATION ((uint16_t)0x0020U)
|
||||
#define LAN8742_ANER_PARALLEL_DETECT_FAULT ((uint16_t)0x0010U)
|
||||
#define LAN8742_ANER_LP_NP_ABLE ((uint16_t)0x0008U)
|
||||
#define LAN8742_ANER_NP_ABLE ((uint16_t)0x0004U)
|
||||
#define LAN8742_ANER_PAGE_RECEIVED ((uint16_t)0x0002U)
|
||||
#define LAN8742_ANER_LP_AUTONEG_ABLE ((uint16_t)0x0001U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ANNPTR_Bit_Definition LAN8742 ANNPTR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ANNPTR_NEXT_PAGE ((uint16_t)0x8000U)
|
||||
#define LAN8742_ANNPTR_MESSAGE_PAGE ((uint16_t)0x2000U)
|
||||
#define LAN8742_ANNPTR_ACK2 ((uint16_t)0x1000U)
|
||||
#define LAN8742_ANNPTR_TOGGLE ((uint16_t)0x0800U)
|
||||
#define LAN8742_ANNPTR_MESSAGGE_CODE ((uint16_t)0x07FFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ANNPRR_Bit_Definition LAN8742 ANNPRR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ANNPTR_NEXT_PAGE ((uint16_t)0x8000U)
|
||||
#define LAN8742_ANNPRR_ACK ((uint16_t)0x4000U)
|
||||
#define LAN8742_ANNPRR_MESSAGE_PAGE ((uint16_t)0x2000U)
|
||||
#define LAN8742_ANNPRR_ACK2 ((uint16_t)0x1000U)
|
||||
#define LAN8742_ANNPRR_TOGGLE ((uint16_t)0x0800U)
|
||||
#define LAN8742_ANNPRR_MESSAGGE_CODE ((uint16_t)0x07FFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_MMDACR_Bit_Definition LAN8742 MMDACR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_MMDACR_MMD_FUNCTION ((uint16_t)0xC000U)
|
||||
#define LAN8742_MMDACR_MMD_FUNCTION_ADDR ((uint16_t)0x0000U)
|
||||
#define LAN8742_MMDACR_MMD_FUNCTION_DATA ((uint16_t)0x4000U)
|
||||
#define LAN8742_MMDACR_MMD_DEV_ADDR ((uint16_t)0x001FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_ENCTR_Bit_Definition LAN8742 ENCTR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_ENCTR_TX_ENABLE ((uint16_t)0x8000U)
|
||||
#define LAN8742_ENCTR_TX_TIMER ((uint16_t)0x6000U)
|
||||
#define LAN8742_ENCTR_TX_TIMER_1S ((uint16_t)0x0000U)
|
||||
#define LAN8742_ENCTR_TX_TIMER_768MS ((uint16_t)0x2000U)
|
||||
#define LAN8742_ENCTR_TX_TIMER_512MS ((uint16_t)0x4000U)
|
||||
#define LAN8742_ENCTR_TX_TIMER_265MS ((uint16_t)0x6000U)
|
||||
#define LAN8742_ENCTR_RX_ENABLE ((uint16_t)0x1000U)
|
||||
#define LAN8742_ENCTR_RX_MAX_INTERVAL ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ENCTR_RX_MAX_INTERVAL_64MS ((uint16_t)0x0000U)
|
||||
#define LAN8742_ENCTR_RX_MAX_INTERVAL_256MS ((uint16_t)0x0400U)
|
||||
#define LAN8742_ENCTR_RX_MAX_INTERVAL_512MS ((uint16_t)0x0800U)
|
||||
#define LAN8742_ENCTR_RX_MAX_INTERVAL_1S ((uint16_t)0x0C00U)
|
||||
#define LAN8742_ENCTR_EX_CROSS_OVER ((uint16_t)0x0002U)
|
||||
#define LAN8742_ENCTR_EX_MANUAL_CROSS_OVER ((uint16_t)0x0001U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_MCSR_Bit_Definition LAN8742 MCSR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_MCSR_EDPWRDOWN ((uint16_t)0x2000U)
|
||||
#define LAN8742_MCSR_FARLOOPBACK ((uint16_t)0x0200U)
|
||||
#define LAN8742_MCSR_ALTINT ((uint16_t)0x0040U)
|
||||
#define LAN8742_MCSR_ENERGYON ((uint16_t)0x0002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_SMR_Bit_Definition LAN8742 SMR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_SMR_MODE ((uint16_t)0x00E0U)
|
||||
#define LAN8742_SMR_PHY_ADDR ((uint16_t)0x001FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_TPDCR_Bit_Definition LAN8742 TPDCR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_TPDCR_DELAY_IN ((uint16_t)0x8000U)
|
||||
#define LAN8742_TPDCR_LINE_BREAK_COUNTER ((uint16_t)0x7000U)
|
||||
#define LAN8742_TPDCR_PATTERN_HIGH ((uint16_t)0x0FC0U)
|
||||
#define LAN8742_TPDCR_PATTERN_LOW ((uint16_t)0x003FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_TCSR_Bit_Definition LAN8742 TCSR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_TCSR_TDR_ENABLE ((uint16_t)0x8000U)
|
||||
#define LAN8742_TCSR_TDR_AD_FILTER_ENABLE ((uint16_t)0x4000U)
|
||||
#define LAN8742_TCSR_TDR_CH_CABLE_TYPE ((uint16_t)0x0600U)
|
||||
#define LAN8742_TCSR_TDR_CH_CABLE_DEFAULT ((uint16_t)0x0000U)
|
||||
#define LAN8742_TCSR_TDR_CH_CABLE_SHORTED ((uint16_t)0x0200U)
|
||||
#define LAN8742_TCSR_TDR_CH_CABLE_OPEN ((uint16_t)0x0400U)
|
||||
#define LAN8742_TCSR_TDR_CH_CABLE_MATCH ((uint16_t)0x0600U)
|
||||
#define LAN8742_TCSR_TDR_CH_STATUS ((uint16_t)0x0100U)
|
||||
#define LAN8742_TCSR_TDR_CH_LENGTH ((uint16_t)0x00FFU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_SCSIR_Bit_Definition LAN8742 SCSIR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_SCSIR_AUTO_MDIX_ENABLE ((uint16_t)0x8000U)
|
||||
#define LAN8742_SCSIR_CHANNEL_SELECT ((uint16_t)0x2000U)
|
||||
#define LAN8742_SCSIR_SQE_DISABLE ((uint16_t)0x0800U)
|
||||
#define LAN8742_SCSIR_XPOLALITY ((uint16_t)0x0010U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_CLR_Bit_Definition LAN8742 CLR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_CLR_CABLE_LENGTH ((uint16_t)0xF000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_IMR_ISFR_Bit_Definition LAN8742 IMR ISFR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_INT_8 ((uint16_t)0x0100U)
|
||||
#define LAN8742_INT_7 ((uint16_t)0x0080U)
|
||||
#define LAN8742_INT_6 ((uint16_t)0x0040U)
|
||||
#define LAN8742_INT_5 ((uint16_t)0x0020U)
|
||||
#define LAN8742_INT_4 ((uint16_t)0x0010U)
|
||||
#define LAN8742_INT_3 ((uint16_t)0x0008U)
|
||||
#define LAN8742_INT_2 ((uint16_t)0x0004U)
|
||||
#define LAN8742_INT_1 ((uint16_t)0x0002U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_PHYSCSR_Bit_Definition LAN8742 PHYSCSR Bit Definition
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_PHYSCSR_AUTONEGO_DONE ((uint16_t)0x1000U)
|
||||
#define LAN8742_PHYSCSR_HCDSPEEDMASK ((uint16_t)0x001CU)
|
||||
#define LAN8742_PHYSCSR_10BT_HD ((uint16_t)0x0004U)
|
||||
#define LAN8742_PHYSCSR_10BT_FD ((uint16_t)0x0014U)
|
||||
#define LAN8742_PHYSCSR_100BTX_HD ((uint16_t)0x0008U)
|
||||
#define LAN8742_PHYSCSR_100BTX_FD ((uint16_t)0x0018U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_Status LAN8742 Status
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define LAN8742_STATUS_READ_ERROR ((int32_t)-5)
|
||||
#define LAN8742_STATUS_WRITE_ERROR ((int32_t)-4)
|
||||
#define LAN8742_STATUS_ADDRESS_ERROR ((int32_t)-3)
|
||||
#define LAN8742_STATUS_RESET_TIMEOUT ((int32_t)-2)
|
||||
#define LAN8742_STATUS_ERROR ((int32_t)-1)
|
||||
#define LAN8742_STATUS_OK ((int32_t) 0)
|
||||
#define LAN8742_STATUS_LINK_DOWN ((int32_t) 1)
|
||||
#define LAN8742_STATUS_100MBITS_FULLDUPLEX ((int32_t) 2)
|
||||
#define LAN8742_STATUS_100MBITS_HALFDUPLEX ((int32_t) 3)
|
||||
#define LAN8742_STATUS_10MBITS_FULLDUPLEX ((int32_t) 4)
|
||||
#define LAN8742_STATUS_10MBITS_HALFDUPLEX ((int32_t) 5)
|
||||
#define LAN8742_STATUS_AUTONEGO_NOTDONE ((int32_t) 6)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LAN8742_IT_Flags LAN8742 IT Flags
|
||||
* @{
|
||||
*/
|
||||
#define LAN8742_WOL_IT LAN8742_INT_8
|
||||
#define LAN8742_ENERGYON_IT LAN8742_INT_7
|
||||
#define LAN8742_AUTONEGO_COMPLETE_IT LAN8742_INT_6
|
||||
#define LAN8742_REMOTE_FAULT_IT LAN8742_INT_5
|
||||
#define LAN8742_LINK_DOWN_IT LAN8742_INT_4
|
||||
#define LAN8742_AUTONEGO_LP_ACK_IT LAN8742_INT_3
|
||||
#define LAN8742_PARALLEL_DETECTION_FAULT_IT LAN8742_INT_2
|
||||
#define LAN8742_AUTONEGO_PAGE_RECEIVED_IT LAN8742_INT_1
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup LAN8742_Exported_Types LAN8742 Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef int32_t (*lan8742_Init_Func) (void);
|
||||
typedef int32_t (*lan8742_DeInit_Func) (void);
|
||||
typedef int32_t (*lan8742_ReadReg_Func) (uint32_t, uint32_t, uint32_t *);
|
||||
typedef int32_t (*lan8742_WriteReg_Func) (uint32_t, uint32_t, uint32_t);
|
||||
typedef int32_t (*lan8742_GetTick_Func) (void);
|
||||
|
||||
typedef struct
|
||||
{
|
||||
lan8742_Init_Func Init;
|
||||
lan8742_DeInit_Func DeInit;
|
||||
lan8742_WriteReg_Func WriteReg;
|
||||
lan8742_ReadReg_Func ReadReg;
|
||||
lan8742_GetTick_Func GetTick;
|
||||
} lan8742_IOCtx_t;
|
||||
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t DevAddr;
|
||||
uint32_t Is_Initialized;
|
||||
lan8742_IOCtx_t IO;
|
||||
void *pData;
|
||||
}lan8742_Object_t;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup LAN8742_Exported_Functions LAN8742 Exported Functions
|
||||
* @{
|
||||
*/
|
||||
int32_t LAN8742_RegisterBusIO(lan8742_Object_t *pObj, lan8742_IOCtx_t *ioctx);
|
||||
int32_t LAN8742_Init(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_DeInit(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState);
|
||||
int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj);
|
||||
int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt);
|
||||
int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt);
|
||||
int32_t LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt);
|
||||
int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* LAN8742_H */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
Reference in New Issue
Block a user